Call now to get tree help suchlike tree cutting, tree notch, bush removal, shrub trimmers, stump fell and lots of other around United States

Call us now

Call now +1 (855) 280-15-30

How to return the item?

Oct 15, Back when I was a kid, my dad taught me to replace leaf spring bushings using a suspension press and an impact gun to do the pressing. Next, I learned to drill the rubber portion out and use a big hammer and chisel to remove the old bushing piece by piece. Later, I learned how to use an air hammer to remove them even quicker.

Removing Bushings in Leaf Spring Eyes. Mike, I am working on a Dodge. I cannot press out the spring eye bushings with a 10 ton press.

1.) Is it ok to heat up the eye and insert and try pressing out the bushing again or is heating a spring eye the wrong thing to do. 2.) When spring eyes are reversed is heat used during that process?Estimated Reading Time: 1 min. Feb 26, The drill deal works best usually. Really grabs and goes all around the bushing sometimes. Or rig up some way to push out the metal sleeve in the center, big vise or ball joint press works. Never used a torch or fire method, sounds like fun though.

May 17, 1. Take a large fairy thick flat bladed screwdriver and jam it in the opening of the spring eye. As you hammer it in it will slightly open the eye.

Maple Tree leaf spots.

Then squirt some lubricant (WD40 etc) around the bushing. Get a piece of wood and hammer the bushing out. Product description. The OTC A Truck Front Leaf Spring, Pin and Bushing Service Set delivers 10 tons of hydraulic force to remove and install truck front spring eye bushing assemblies quickly and easily. Services bushings with diameters from /4 inch through /8 inch and pin diameters from 7/8 inch through /8 stumpfelling.buzzs: