Call now to get tree help suchlike tree cutting, tree notch, bush removal, shrub trimmers, stump fell and lots of other around United States


Call us now

Call now +1 (855) 280-15-30






The oil hole should be centrally located and in the.

Jul 29, Oil Grooves for Bronze Bushings. Oil Hole: A single oil hole without any grooving is commonly used in short bearings with an L/D ratio of or less. Oil will flow axially unaided to each side of the oil inlet hole by as much as ½”.

The oil hole should be centrally located and in the unloaded area to ensure that oil is distributed equally Estimated Reading Time: 3 mins. Mar 05, Oil grooves in a bronze bushing. Likes: 0. Results 1 to 13 of 13 Thread: Oil grooves in a bronze bushing. Thread Tools. Show Printable Version;AM #1.

Register Forgot password?

rjibosh. View Profile View Forum Posts Hot Rolled Join Date Jul Location Los Angeles Posts Post Thanks / Like Likes (Given). Oil & Grease Groove Bronze Bushings Our Cast Bronze Bushings are machined from continuous cast C (SAE ) bronze for superior quality and performance. The continuous casting process assures a uniform bronze structure throughout the bearing, free from porosity and hard particle inclusions commonly found in other cast processes.

Sep 30, Set lathe for 50 to 60 RPM's. Position boring bar for the farthest oil groove. Touch tool to part and advance the tool for the depth that you want the oil groove with the lathe turning. When the tool quits cutting feed the tool to the second end stop with a fast travel and when you reach that stop let the lathe finish that end groove. Member List; Calendar; Forum; General; If this is your first visit, be sure to check out the FAQ by clicking the link above.

You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. Jan 18, The bushing is Bronze, /4" ID. by 2" OD. /2" long. I don't see any real advantage to cutting a spiral groove versus a straight groove.

The purpose of the groove is to more quickly distribute the lubricant along the length of the bearing surface; capillary action and the small clearance between pin and bearing will take care of.

China Bronze Bushing With Grooves - Select Bronze Bushing With Grooves products from verified China Bronze Bushing With Grooves manufacturers, suppliers on stumpfelling.buzz